Large Volume Walk In Test Chamber
IEC60068 Walk in test chamber is a laboratory configurated heating,cooling
and protecting device,which is widely used in large
accessories,semi-finished and finished products environmental
test.In the side of the chamber,there is a test hole made of low
foam silicone rubber with fuction of undertaking high and low
temperature and preservation heat.
1.Chamber Structure for walk-in type room climatic test chamber
Material of outer case: The housing is processed and formed with
high-quality (t=1.2mm) A3 color plates through CNC machine with
surface sprayed with plastics, looking smoother and more artistic.
Material of inner case: Imported high-grade stainless steel
Insulation material: High-density glass fiber cotton with thickness
Insulation material of door: Glass fiber cotton.
Temperature Circulation System
Customized air-conditioning low-noise long-axis fan motor and
high/low temperature resistant stainless steel multi-swing impeller
to achieve strong air convection and vertical diffusion and
Seal: The double-layer high temperature resistant high-tension
sealing strip between door and chamber of the equipment can ensure
air-tight of testing area.
Door handle: Introduce the door handle without counteraction for
Feet wheel: High-quality fixable PU active wheels are installed on
the bottom of the machine.
Observation window introduces multi-layer insulated tempered glass
and has glue flake conducting film on the inner side for defrosting
(so as to observe the whole test course at any time).
Testing hole allocated at the left side of the machine (ø50mm) is
used to connect testing power cord or signal wire to the
outside.(Hole diameter and quantity shall be specified before
Distance between drainage hole and floor: 190 mm
Attached with condensate receiving tray to drain water to the
outside of the chamber.
2.2. Control System for walk-in type room climatic test chamber
Imported P.I.D micro-computer S.S.R temperature controller of
digital touch key
PT100 platinum resistance thermometer
Balance temperature and humidity adjusting method
Temperature and humidity control introduces the same channel
coordination control method of P.I.D + S.S.R system.
Have the function of automatic calculus, and can revise temperature
& humidity change conditions to realize more accurate and
stable temperature & humidity control.
Fault alarming and cause, resolution reminding function
Power failure protection function
Calendar timing function (Automatic starting and stopping)
3. Heating and Refrigeration System for walk-in type room climatic
IR Ni-Cr alloy high-speed heating electric heater
Totally independent high-temperature system shall not affect low
temperature test, high temperature test and alternating hot and
The output power of temperature & humidity control shall be
calculated by micro computer to achieve electricity use benefits of
high precision and high efficiency.
♣ How long will it take from order placement to goods delivery?
For standard environmental chambers, we have semifinished products
and finished products, the delivery time is about 15days.For
non-standard environmental chambers, the delivery time is about
♣ How many certifications do you have for drive in test room for car ?
We have passed the CE certification, the ISO certification and SGS
♣ What solutions will you provide if your products break down ?
We will give you guidance through video conference/picture when we
receive your notice of repair. If necessary, we could also send our
engineers to your country for troubleshooting.
♣ How to install and use the drive in test room for car?
The product is shipped with an operating instructions and video of
English version.For large walk in test chamber that can't be put
into the container, we will dismantled it first and send our
engineer for installating.
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port
3. Customers specifying freight forwarders or negotiable shipping
4. Delivery Time: 7-10 days for samples; 15-30 days for batch
1.all of our products will be checked one by one before shipping;
2.customer should check the package when receiving;
3.all machine wihin 1 year free warranty, but here is not warranty
if that's obviously caused by man-made
free technical support always;
4. due to the low vaule of the accessories,we don't accept any return or exchange.
1. Pre-sales service
- 24 hour online to ensure quick response.
- Professional guiding derpartment to make the best proposal
- China top manufactory to ensure the quality and details servive.
2. Producing process
- OEM and ODM is achieved.
- Semi-manufactures photos can send to you during the producing
- Clearance documents will send to you through DHL
- Update the latest new about the delievery.
3. After-sales service
- One year warranty
- Broken spare parts will be free sended again.
- Installation guidance is achieved.