Digital Ingress Protection Sand Dust Test Chamber
LED sand and dust test chamber is applied to all mechanic,
electric, electronic, electric chemical and mechanical and electric
equipments, it is used to evaluate whether equipment can
resistivity and storage, running or not in air of dry sand or dust.
It is applied to IEC-529, GB4208-93, GB2423.37-89 and GJB150.12.
Specification parameter listdust resistance test machine
|The utility room capacity(L)||500||800||1000||1500||2600|
|Technique Characteristic||Metal sieve standard spacing||50um|
|Metal wire diameter||75um|
|Talcum powder dosage||2Kg/m ² ~4Kg/m ²|
|Spray the powder declines the dust form||1 Decline the dust type freely: the adoption leaves the heart
breeze machine to blow the sand dust to the box to take over 1/5
make it sink freely.|
2. Blow the sand dust: The barometric type of bottom sprays the
ash, three file pressures are adjustable
|The utility room size(cm)||D||80||90||100||100||120|
|Material||Internal||SUS304 # stainless steel|
|External||Cold rolled sheet antirust coating processing or #SUS304 stainless
|Control system||Operator interface||The liquid crystal display color touch screen controller or
touch-tone LCD contrller(optional)|
|Operation mode||program operation/ constant type operation|
|power supply||AC380V or 220V ± 10%,50HZ|
|Standard||Two pieces of test material shelf, one instruction, and one dust
• Dust re-cycle blowing by circulating pump.
• Dust collection section is located on bottom of test chamber.
• A heater fixed into test chamber to keep dust dry.
• A viewing window with a manually controlled wiper.
• Programmable color display touch screen controller
• A stainless steel shelf for placing test specimens.
• Test chamber internal illumination
• Vacuum system for specimen
• Bottom install 4 castors for ease moving, andwith brakes function
• Safety protection
• Easy to operate
• Standard: IEC60529
Electronic and Control systems
1. The main controller LCD touch screen, can do programmable test
2. PLC complex man-machine interface control, contrived moving
time, rest time and power-on time setting.
3. multiple sets of test procedures can be planned in the
interface, and each group can be arbitrarily set the desired
action, easy to operate.
4. If a fault occurs in the operation of various signals are
written records will be displayed to facilitate maintenance.
5. Touch the setting, digital direct display, all the conditions
fully automatic locking by a microcomputer.
6. imported electronic temperature and humidity sensor, not need to
The Dustproof Test Chamber XB-OTS-IP65X is according to IEC60529,
IEC 60598, GB2423.37-89 (Test L:dust test methods), GB 4208-93
protective casing grade (IP code), GB/T 4942.2-93(protective casing
grade of low-voltage apparatus), GB 7000.1-1996, GB
7001-1986(protective casing grade of lamps),DIN40050 and IP5K0. The
XB-OTS-IP65X is applied in LED or other luminaries for IP5X and
♣ How long will it take from order placement to goods delivery?
For standard environmental chambers, we have semifinished products
and finished products, the delivery time is about 15days.For
non-standard environmental chambers, the delivery time is about
♣ How many certifications do you have for drive in test room for car ?
We have passed the CE certification, the ISO certification and SGS
♣ What solutions will you provide if your products break down ?
We will give you guidance through video conference/picture when we
receive your notice of repair. If necessary, we could also send our
engineers to your country for troubleshooting.
♣ How to install and use the drive in test room for car?
The product is shipped with an operating instructions and video of
English version.For large walk in test chamber that can't be put
into the container, we will dismantled it first and send our
engineer for installating.
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for batch goods, for FCL; Airport/ Port
3. Customers specifying freight forwarders or negotiable shipping
4. Delivery Time: 7-10 days for samples; 15-30 days for batch
1.all of our products will be checked one by one before shipping;
2.customer should check the package when receiving;
3.all machine wihin 1 year free warranty, but here is not warranty
if that's obviously caused by man-made
free technical support always;
4. due to the low vaule of the accessories,we don't accept any return or exchange.
1. Pre-sales service
- 24 hour online to ensure quick response.
- Professional guiding derpartment to make the best proposal
- China top manufactory to ensure the quality and details servive.
2. Producing process
- OEM and ODM is achieved.
- Semi-manufactures photos can send to you during the producing
- Clearance documents will send to you through DHL
- Update the latest new about the delievery.
3. After-sales service
- One year warranty
- Broken spare parts will be free sended again.
- Installation guidance is achieved.